Aug 22, 2012 Windows 2000, Windows Server 2003, Windows XP You can download and install SubInACL.exe on the following operating systems: Windows 2000.

UNIDRV.dll Errors and Solutions Unidrv Printer Driver The file UNIDRV.dll is a 32bit Windows DLL module for Microsoft Windows Operating System software or other related programs. The file and the associated Microsoft Windows Operating System software was developed by Microsoft Corporation. The file was licensed as © Microsoft Corporation. All rights reserved. UNIDRV.dll file is a critical component for the software to work properly and without any dll error messages.

You may receive an error message like the ones below that indicates the file is not found, damaged, or the wrong version. • This application failed to start because UNIDRV.dll was not found. • The file UNIDRV.dll is missing or corrupted.

• A required component is missing: UNIDRV.dll. Please install the application again. • Error loading UNIDRV.dll. The specified module could not be found. • The program can't start because UNIDRV.dll is missing from your computer.

Try reinstalling the program to fix this problem. • UNIDRV.dll is either not designed to run on Windows or it contains an error.

To fix the error, you need to copy the missing UNIDRV.dll file to your system or replace the corrupted dll file with a working one by following the instructions below. There are 4 different versions of the dll file available for download with sizes between 257.5KB - 390.5KB. How to Install UNIDRV.dll You can download UNIDRV.dll for free from the download section on this page.

After you download the compressed file, unzip it to a convenient location on your computer. In order to fix dll related errors, you need to copy the.dll file to the installation folder of the application or game, or install.dll file directly to Windows (Windows XP, Vista, Windows 7, Windows 10). Install DLL File to Program Folder Copy the extracted UNIDRV.dll file to the installation folder of the application or game. Check if the problem is solved. If the problem persists or you are not sure which software is having problems, install the.DLL file directly to Windows. Register DLL File Using Microsoft Regsvr Copy the file to 'C: Windows SysWOW64 ' (32bit) Copy the file to 'C: Windows System32 ' (64bit) You can install the.dll file in both system folders without any problems. In order to complete this step, you must run the Command Prompt as administrator.

Open the Start Menu and before clicking anywhere, type 'cmd' on your keyboard. Right-click the 'Command Prompt' search result and click the 'Run as administrator' option. Paste the following command into the Command Line window that opens up and press Enter key.%windir% System32 regsvr32.exe UNIDRV.dll &%windir% SysWoW64 regsvr32.exe UNIDRV.dll.

Ptv Drama Serial Aanch Episode 1. Hello, if you talk about Windows server 2008 R2 then make sure the 32bit drivers use the EXACT same driver name as the 64bit version. More details in this threads from another wuestion about: First things first. Your running Server 2008. Thing Called Love Above And Beyond Burning Bridges Remix Download. NEVER go back to the printers folder for local printers.

PRINTMANAGEMENT.MSC is the tool. Right click on the printer, Manage sharing.

Are there any error messages during the install? Error 2 is file not found Error 3 is invalid network path Error 5 is access denied. The driver names for x86 must be identical to those used on x64. If the name does not match you should get an error about the selected printer driver not found. What print drivers are installed? Hi, Please check the following link first: There are two methods available, you can choose either of them to add a 32-bit printer driver to a 64-bit Vista or Windows Server 2008 printer server. For more information, please also check the following articles: How to: Add 32-bit print drivers on 64-bit Windows Server 2008 based print server Adding Print Drivers to alternate Kernel OS (x86 to x64 or x64 to x86) Please note that both x86 and x64 drivers MUST have the same name.

If they have the same name, they will appear automatically in additional drivers for both architectures in your printer’s sharing properties. Nina Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. I found this post: I used these steps from that post: Open Print Managment, navigate to Print Server->Drivers, Right click Drivers and select Add Driver. Click on Next Uncheck the 'x64 Type 3 - User Mode' Check the 'x86 Type 3 - User Mode' Click on Have Disk.

Click on Browse. (to the x86 (32-bit) Win7 machine) } For example: Click on Open Click on Ok Under 'Printers' Select the print driver that you want to install Click on Next Click on Finish Now you should be able to see the x86 print drivers installed under the 'Processor' column. Click on Close I get to the point where I add the driver, and that works. So I click on OK, and that part is done. But I need to add that 32bit driver to a printer. And that's where I'm lost in these instructions, where it says 'under printers'. Under printers in Print Management?

The steps don't jive at that point. If I do Properties on a printer, and click on the Advanced tab, and click on the drop-down list of drivers, I can't distinguish the 32bit PostScript driver from the 64bit PS driver. Before I started all this I downloaded all the 32bit and 64bit drivers from the manufacturer's website. But as I said, when you click on that dropdown list under the Advanced tab, you can't tell the 32bit form the 64bit PS drivers for that printer. What am I missing?

Hello, if you talk about Windows server 2008 R2 then make sure the 32bit drivers use the EXACT same driver name as the 64bit version. More details in this threads from another wuestion about: First things first.

Your running Server 2008. NEVER go back to the printers folder for local printers. PRINTMANAGEMENT.MSC is the tool.

Right click on the printer, Manage sharing. Are there any error messages during the install? Error 2 is file not found Error 3 is invalid network path Error 5 is access denied. The driver names for x86 must be identical to those used on x64. If the name does not match you should get an error about the selected printer driver not found.

What print drivers are installed? Hi, Please check the following link first: There are two methods available, you can choose either of them to add a 32-bit printer driver to a 64-bit Vista or Windows Server 2008 printer server. For more information, please also check the following articles: How to: Add 32-bit print drivers on 64-bit Windows Server 2008 based print server Adding Print Drivers to alternate Kernel OS (x86 to x64 or x64 to x86) Please note that both x86 and x64 drivers MUST have the same name. If they have the same name, they will appear automatically in additional drivers for both architectures in your printer’s sharing properties. Nina Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. I was struggling with this last week.

For me, by far the quickest solution was to use the global drivers provided by Xerox. Go to their drivers page and download the 64-bit PCL and PS global drivers, then download the 32-bit versions. The downloads include the drivers PLUS THE CORRECT NTPRINT.INF everyone's looking for.

No digging around cab files, winsxs, no looking for installation media, no playing with pnputil, no need to go to printer management console, etc. It just works. You install the 64-bit version, then you install the 32-bit version, and point it to the x86 ntprint.inf included with the download. And once it sees the NTprint.inf (for the Xerox driver you'll find it in the 'ntprint.inf_x86' folder), additional 32-bit driver installs are a snap.

You can download the universal Hp driver afterward if necessary, although I've found the Xerox global PS and PCL drivers seem to work fine on the HPs I've tried so far. Short Answer:. - Windows x64 Workstation/Print Servers must be done in the following order. (W2k3R2x64/W2k8x64/W2k8R2x64/W2k12x64) 1) Install x64 driver when installing the queue 2) Go to the Queue's Properties ->Sharing tab ->Additional Drivers. ->check box to install x86 driver ->click ok (if the driver is not in the same folder as the x64 driver it will ask you where to locate the x86 driver.). - Windows x86 Workstation/Print Servers must be done in the following order. (W2k3x86/W2k3R2x86/W2k8x86) 1) Install x86 driver when installing the queue 2) Go to the Queue's Properties ->Sharing tab ->Additional Drivers.

->check box to install x64 driver ->click ok (if the driver is not in the same folder as the x86 driver it will ask you where to locate the x64 driver.).